When driving a vehicle, one way to save on fuel use is to use eco-driving techniques. This is considered able to save time and costs, safe and certainly environmentally friendly. The mobile tyre fitting london explained, in addition to fuel efficiency, the Eco Driving technique is also an effort to extend the service life of the vehicle because its performance is not forced.

Three factors affect the Eco Driving technique, namely the driver, the condition of the car, and the environment, calculate the estimated driving time by paying attention to the travel route to avoid congestion. If you are stuck in a traffic jam, the car will often stop and go, a condition in which the car must stop and run again according to traffic density, resulting in a waste of fuel. However, in addition to avoiding traffic jams, in calculating the estimated driving time, drivers must also provide more time in case of unexpected events on the way. As much as possible avoid driving aggressively because it can trigger the use of wasteful fuel. In driving with the Eco Driving technique, to achieve maximum rotation the driver must press the gas pedal slowly and immediately move to a higher acceleration gear position.

Drivers should ideally keep the engine speed at 2,000 to 3,000 pm. If you shift gears more than that number, the engine speed will be too high and the use of fuel will be much more wasteful. Take advantage of the acceleration momentum when meeting uphill terrain and use engine breaks when meeting downhill terrain. High acceleration in driving will only cause excessive fuel consumption. Likewise, when trying to brake, the driver must calculate the braking distance of about 3 seconds by pressing the brake pedal gently and using the engine brake for braking. In addition, use the ideal vehicle speed with a constant of around 60-70 kilometers per hour to achieve fuel efficiency.

Tagged : #

Corlissa Bramowitz

Leave a Reply

Your email address will not be published. Required fields are marked *